T-H Marine Supplies
-
T-H Marine Supplies T-H Marine Z-LAUNCH™ 10' Watercraft Launch Cord f/Boats up to 16'
Z-LAUNCH™ 10' Watercraft Launch Cord for Boats up to 16'Makes launching boat by yourself as easy as 1-2-3!Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.Features: Simple and safe operation No-hassle design Attaches easily Expands to more than 20' Unlike rope, will not jerk your watercraft or you Stay safe and dry launching your boat alone Great for ramps with "no power" laws WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : ZL-10-DP UPC : 853333003794
$61.90
-
T-H Marine Supplies T-H Marine HOT FOOT™ Pro - Top Load Foot Throttle f/Chrysler Yamaha
HOT FOOT™ Pro - Top Load Foot Throttle for Chrysler YamahaHOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.Features: Drive your boat like you drive your car Improved Safety & Throttle Control Attractive Full Color Pedal Graphics Topside Cable Connections Patented Idle Stop for FICHT & Optimax Stainless Steel Hardware with Teflon Bushings *Requires Longer Throttle Cable (Not Included)Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : HF-1CT-DP UPC : 733572001952
$265.99
-
T-H Marine Supplies T-H Marine HOT FOOT™ Universal Original Foot Throttle f/All Marine Engines
HOT FOOT™ Universal Original Foot Throttle for All Marine EnginesNow compatible with all Mercury 175-300 Pro XS outboard motorsThe Original and ONLY real HOT FOOT™ ThrottleDrive your boat safer by driving it like your car. This is the one and only HOT FOOT™ throttle - the original boat foot throttle that has been on the market for 30+ years.This throttle allows you to drive your boat like you do your car. You keep both hands on the wheel and control the throttle with your foot. The throttle returns to idle if you remove your foot. This throttle is a must-have for safe operation of high performance boats.Features: Drive your boat like you drive your car -- features make driving your boat fun and safe Number one throttle on the market for over 20 years Provides added safety and performance Improves throttle control for all outboard and inboards All cast aluminum and stainless steel hardware Lightweight and resistant to corrosion Stainless steel hardware and non-sticking teflon and nylon bearing surfaces for trouble free operation Nylon and teflon bushings on all critical pivot points Stainless steel spring returns engine to idle position when released Equipped with toe clip for additional safety in extreme operating conditions Uses standard control cables for easy hook-up (longer throttle cable not included) Mounts directly to floor of boat with four screws (not included) Patented Idle Stop for FICHT and Optimax Engines Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : HF-1-DP UPC : 733572001600
$235.99
-
T-H Marine Supplies T-H Marine HOT FOOT™ Pro - Top Load Foot Throttle f/OMC Mercury
HOT FOOT™ Pro - Top Load Foot Throttle for OMC MercuryHOT FOOT™ Pro is the ultimate upgrade for the boater looking for safety and performance features that made Hot Foot™ the foot throttle boaters demand. HOT FOOT™ Pro sports a rugged aluminum finish with great color graphics on the pedal to accent any high performance boat. The top loading feature for the throttle cable* makes HOT FOOT™ Pro easier to install and gives more foot and leg room. Standard features include a patented idle stop for the Ficht and Optimax engines, stainless steel return spring, Teflon bushings on all critical pivot points and tow clip for added security.Features: Drive your boat like you drive your car Improved Safety & Throttle Control Attractive Full Color Pedal Graphics Topside Cable Connections Patented Idle Stop for FICHT & Optimax Stainless Steel Hardware with Teflon Bushings *Requires Longer Throttle Cable (Not Included)Optional Slide Mount (HFM-1-DP) available for comfort and multiple drivers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : HF-1T-DP UPC : 733572001907
$248.99
-
T-H Marine Supplies T-H Marine Hot Foot™ Adjustable Slide Mount
Hot Foot™ Adjustable Slide MountThis sliding mount allows easy adjustment of the Hot Foot™ throttle position for different drivers or driving conditions. Mount allows over 5" of adjustment for people of different heights.Features: Easy Adjustment of Hot Foot™ position Stainless Steel Fasteners & Release Pin Allows 5” of Slide Adjustment Great for multiple drivers of different heights Allows change of throttle position for longer runs All extruded aluminum and stainless steel construction WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : HFM-1-DP UPC : 733572011111
$108.45
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Red Prop Nut f/Lowrance Ghost Trolling Motor
G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-LG-R-DP UPC : 733572209785
$73.86
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Black Prop Nut f/Lowrance Ghost Trolling Motor
G-Force ELIMINATOR Black Prop Nut for Lowrance Ghost Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Lowrance Ghost trolling motors. This specific part comes in a black color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. Key Eliminator Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-LG-BK-DP UPC : 733572209716
$73.86
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Red Prop Nut f/Garmin Force Trolling Motor
G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-GF-R-DP UPC : 733572209921
$73.86
-
T-H Marine Supplies T-H Marine 8" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - Verado
8" Atlas Series Hot Shot™ Jack Plate Hole Shot Plate - VeradoREVOLUTIONARY. SIMPLE. UNIQUE. EXCITING. These are but a few of the comments coming from users of T-H Marine's HOT SHOT™ hole shot plates. This simple-but-revolutionary plate easily attaches to the bottom of our jack plate to provide an amazing 18 to 20 percent better hole shot. That is 2 to 3 seconds faster out of the hole. Hot Shot™ does this by dramatically reducing water drag on take off as well as serving as a center trim tab. An added advantage is the ability to stay on plane and virtually eliminating porpoising at lower speeds.Features: Models available for our ATLAS™ hydraulic jack plates and Z-LOCK™ manual plates. Models Marked "T" Have side imaging Transducer Cut-Out. Slot fits most Model SI Transducers. Models to Fit All ATLAS™ Jack Plates (both standard and heavy duty jack plates) Provides Improved Hole Shot Reduces Water Drag at Take Off Reduces Porpoising Manufacturer : T-H Marine Supplies Manufacturer Part No : AHJHSP-8V-DP UPC : 733572070101
$109.99
-
T-H Marine Supplies T-H Marine Oetiker Stepless Clamp Kit w/Pliers
Oetiker Stepless Clamp Kit with PliersStepless™ 150-Piece Clamp Rigging Kit by T-H Marine®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind, this product by T-H Marine® will last a lifetime. Features: Plastic storage case contains 150 stainless steel Oetiker earless clamps, 10 each of 15 popular sizes, plus standard pincer installation tool Oetiker hose clamps with mechanical interlock allows use of pre-coated materials Specially formed strip edges reduce the risk of damage to the part being clamped with uniform compression and increased clamping force All 304 stainless steel bands - Kit includes full size range for all marine hose Includes: (10) 5.8-7MM Ear Clamps (10) 7.8 9.5MM Ear Clamps (10) 8.8-10.5MM Ear Clamps (10) 9.6-11.3MM Ear Clamps (10) 11.5-14MM Ear Clamps (10) 12-14.5MM Ear Clamps (10) 13.2-15.7MM Ear Clamps (10) 14.5-17MM Ear Clamps (10) 15.3-18.5MM Ear Clamps (10) 17.8-21MM Ear Clamps (10) 22.4-25.6 Ear Clamps (10) 26.9-30.1MM Ear Clamps (10) 28.4-31.6MM Ear Clamps (10) 37.8-41MM Ear Clamps (1) Oetiker Jaw Pliers (1) Plastic Tackle Tray Manufacturer : T-H Marine Supplies Manufacturer Part No : 18500000 UPC : 733572076806
$203.99
-
T-H Marine Supplies T-H Marine Troll-Tamer™ f/Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5. Manufacturer : T-H Marine Supplies Manufacturer Part No : RMC-104FMK-DP UPC : 733572078503
$153.38
-
T-H Marine Supplies T-H Marine Troll-Tamer™ f/Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing
Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5. Manufacturer : T-H Marine Supplies Manufacturer Part No : RMC-101FMK-DP UPC : 733572078954
$156.99
-
T-H Marine Supplies T-H Marine Troll-Tamer™ f/Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing
Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5. Manufacturer : T-H Marine Supplies Manufacturer Part No : RMC-108-DP UPC : 733572083002
$179.99
-
T-H Marine Supplies T-H Marine Replacement Actuator f/ATLAS™ Jack Plates Post March 2014
Replacement Actuator for ATLAS™ Jack Plates Post March 2014Features: Allows customers to remove the motor from a faulty AHJACT-3-DP and replacement it with a new one More cost effective than replacing the entire actuator WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : AHJACT-3-DP UPC : 733572083200
$953.99
-
T-H Marine Supplies T-H Marine Troll-Tamer™ f/Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing
Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5. Manufacturer : T-H Marine Supplies Manufacturer Part No : RMC-105FMK-DP UPC : 733572078558
$153.38
-
T-H Marine Supplies T-H Marine Troll-Tamer™ f/Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" Spacing
Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" SpacingThe Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditionsThe latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5. Manufacturer : T-H Marine Supplies Manufacturer Part No : RMC-109-DP UPC : 733572083057
$181.57
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling Motor
G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-MK-BK-DP UPC : 733572083255
$73.86
-
T-H Marine Supplies T-H Marine G-Force Troll Cable Organizer - Black Neoprene
G-Force Troll Cable Organizer - Black NeopreneWith the patented design of T-H Marine's Troll Jacket, you can protect and manage your trolling motor cables with ease!The G-Force Troll Jacket is a 2mm neoprene trolling motor wire and cable organizer. It measures 60” long and includes a velcro closure. While wrapped, the diameter is about 1.5”.For maximum compatibility for your setup, you can cut and trim the sides where your cables need to come out. This eliminates the need for zip ties along the factory cable cover. It also helps you bundle and organize adjacent wires, like those for your depth finder and HydroWave.Beyond organization, the Troll Jacket prevents exposure of factory cables. If your cables have electrical tape repair, the Troll Jacket gives an additional layer of defense against the elements. Manufacturer : T-H Marine Supplies Manufacturer Part No : GFTJ-1-DP UPC : 733572099751
$42.92
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut f/Minn Kota 35-70 Trolling Motor
G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-MKS-C-DP UPC : 733572084054
$73.86
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 35-70 Trolling Motor
G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-MKS-BK-DP UPC : 733572083958
$73.86
-
T-H Marine Supplies T-H Marine G-Force ELIMINATOR Trolling Motor Blue Prop Nut f/Minn Kota 35-70 Trolling Motor
G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling MotorOne of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : GFEL-MKS-BU-DP UPC : 733572084009
$73.86
-
T-H Marine Supplies T-H Marine Transom Trim Control Push Button Trim Switch
Transom Trim Control Push Button Trim SwitchTransom Trim Control Switch/Hydraulic Jack Plate SwitchPut a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : TTC-1-DP UPC : 733572003406
$66.72
-
T-H Marine Supplies T-H Marine Foam Rod Holders
Foam Rod HoldersVersatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.Features: Stores 6 rods neatly and securely Mount horizontally or vertically Foam grip pads Great for boats, RVs or garages Economical for boat rod lockers Corrosion proof Durable and lightweight WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : FRH-1P-DP UPC : 733572003871
$27.20
-
T-H Marine Supplies T-H Marine Additional Remote Control Unit f/2-Way Boat Alarm System
Additional Remote Control Unit f/2-Way Boat Alarm SystemProtects your boat and valuable equipment from theft.Features:Two Way Remote Alerts with Sound, Light & VibrationWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Manufacturer : T-H Marine Supplies Manufacturer Part No : TWAR-1-DP UPC : 733572073508
$60.99
